Multi strand Post-Tension System

Multi strand Flat Anchorage System
  • Multi strand Flat Anchorage System
  • Multi strand Flat Anchorage System
  • Multi strand Flat Anchorage System
  • Multi strand Flat Anchorage System
Product Description

Details of each part in Multistrand Flat Anchorage System


Product Description

1. Flat anchorage can be used to anchor PC strand which strength below 2000Mpa.
2. Flat anchorage has excellent static load anchoring performance. Anchoring efficiency factor is ηA≥0.95 and elongation εa≥2% , and meet International strandard FIP 1993<Post tensioned prestressing system acceptance advice>
3. concrete slab has excellent fatigue resistance. It pass 200 million fatigue resistance test which stress amplitude is 120MPa, and the upper limit of stress is 0.65fpk. 
4. Flat anchorage has good self-anchor performance
5. The draw-in of anchor is ≤6mm.
6. The friction loss of anchor is ≤2.5%

7. We have kinds of anchorage and appropriate stressing equipments.


flat anchor head on Multi strand Flat Anchorage System


anchor wedge for Multi strand Flat Anchorage System



spiral bar on Multi strand Flat Anchorage System

bearing plate on Multi strand Flat Anchorage System

bonded/unbonded pc strand for Multi strand Flat Anchorage System



corrugated duct(ganvalnized or HDPE)


Parameter of flat anchorage system


If you have any question,feedback or comments,please fill out the form below and we will reply you back as soon as possible
Product  
Name  
Tel  
Email  
Content